RTS Tips On Resilient Floor Finish Problems.
Website: http://www.rtsproducts.com
The finished floor quality can be effect with loot of conditions. Conditions, that are sometimes out of our control, but conditions that every professional maintenance person, stuff should know about.We hope the next list will help to determine what those problems are and what to look for. .
| Problem | Look For |
| Hazing | High humidity, dirty mop, poor rinsing of the cleaning chemicals, recoated too soon, material was frozen. |
| Scuffing | Coats are too heavy |
| Powdering | Low humidity, freshly stripped floor, poorly sealed, allowed becoming "bone dry" before coating, drafts promoting fast vaporization of the film, coats too thin. |
| Streaking | Dirty floor, dirty mop, pronounced high humidity recoated too soon. |
| Fish Eyes | Greasy floor, soap film. |
| Peeling, no adhesion | This can mistakenly be judged as extreme case of powdering. Some old waxy floor finish underneath new floor with original factory coating. |
| Black Heel Marks | Coats are too heavy. |
| Poor Flow | Greasy surface. Examine container of the finish used. It was perhaps partly full, stored in a hot area, or not properly closed. |
For more
cleaning related information or cleaning related help, advice,
product order contact as at:
RTS Products Inc.
5195 Bradco Blvd. Mississauga, Ontario
L4W2A6, Canada
Tel: (905) 625-5552
Toll free: 1-866-858-7383
Fax: (905) 625-3123
Website:
http://www.rtsproducts.com
Email:sales@rtsproducts.com
Copyright & Fair Use:
Fell free to use the above
document. However it is copyrighted by RTS Products Inc.
http://rtsproducts.com. You are
not allowed to change anything in this document, including remove the
Copyright & Fair Use note. You are not allowed to re-publish it
by any means without our written permission. However feel
yourselves free to print as many copy out as many you need. That's called fair
use.