• "Floor Hazard" signs
• Dual Speed Floor machine
• Supplies for damp mopping
• Putty knife
• Quadine Disinfectant
• Focus buffing solution
• Quart Trigger Sprayer
• Buffing Pads

• Prepare the area for buffing
   
  • Place "Floor Hazard" signs in easy-to see locations near the entrances of the area being buffed
  • Move supplies and equipment into area
  • Damp mop the area to be buffed
     
• Choose the proper pad for your machine according to “Floor Pads” above and buff the floor.
   
  • Start along the baseboards at the farthest corner from the entrance into the room
  • Move backward toward the entrance using a side-to-side motion of overlapping strokes
  • After buffing the entire area, use a clean dust mop to pick up any dust left from the buffing operation
     
• Clean the equipment and store properly.
   

For more cleaning related information or cleaning related help, advice, product order contact as at:

RTS Products Inc.

5195 Bradco Blvd. Mississauga, Ontario
L4W2A6, Canada
Tel: (905) 625-5552
Toll free: 1-866-858-7383
Fax: (905) 625-3123
Website: http://www.rtsproducts.com
Email:sales@rtsproducts.com

 

Copyright & Fair Use:
Fell free to use the above document. However it is copyrighted by RTS Products Inc. http://rtsproducts.com.  You are not allowed to change anything in this document, including remove the Copyright & Fair Use note. You are not allowed to re-publish it by any means without our written permission. However feel yourselves free to print as many copy out as many you need.  That's called fair use.