RTS Tips on How to Spray Buff Floors.

RTS Tips on How to Spray Buff Floors.

It is necessary to spray buff finished floors to maintain appearance and cleanliness without having to wet scrub or wet strip. Spray buffing removes dead floor finish and dirt while restoring glossiness. It also levels and fills scratches which reduces the need for stripping. In the long run, spray buffing saves money by cutting re-finishing costs.

These costs are not only in the materials, but the labour. Re-finishing floors is labour-intensive. By reducing the number of times a floor must be stripped and finished to maintain its appearance, both materials and labour costs can be cut drastically.

Supplies and Equipment

"Floor Hazard" signs
Dual Speed floor machine
Supplies for damp mopping
Putty knife
Focus Spray Buff solution
Quart Trigger Sprayer
Buffing Pads

Procedure

Prepare area for spray buffing.
- Place "Floor Hazard" signs at easy-to-see locations near the entrances into the area being spray buffed.
- Use a putty knife to remove any gum stuck to the floor.
- Depending on condition of the floor, damp mop if necessary.
- If required, disinfect the area by mopping with Quadine Disinfectant.
- Attach buffing pad to the floor machine.
Inspect the room or area to be spray buffed to determine where attention is needed.
Starting at the farthest corner from the entrance, spray a 3' x 3' area in front of the machine with Focus and buff immediately until glossy but not until tacky.
Repeat same spray buffing operation for 3' by 3' areas until entire floor has desired appearance.
When finished remove the "Floor Hazard" signs.

For more cleaning related information or cleaning related help, advice, product order contact as at:

RTS Products Inc.

5195 Bradco Blvd. Mississauga, Ontario
L4W2A6, Canada
Tel: (905) 625-5552
Toll free: 1-866-858-7383
Fax: (905) 625-3123
Website: http://www.rtsproducts.com
Email:sales@rtsproducts.com

Copyright & Fair Use:
Fell free to use the above document. However it is copyrighted by RTS Products Inc. http://rtsproducts.com. You are not allowed to change anything in this document, including remove the Copyright & Fair Use note. You are not allowed to re-publish it by any means without our written permission. However feel yourselves free to print as many copy out as many you need. That's called fair use.